< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=1022966456349414&ev=PageView&noscript=1" />

HSCRANE 45t Travel Lift: Split Marina Case Study

Release time:Nov-20-2026

Project Background and Requirements

Split, on the eastern Adriatic coast, is a key hub for luxury yacht maintenance in the Mediterranean. It regularly handles launching, lifting, and transferring luxury yachts measuring 40 to 60 meters. A luxury marina in the region previously operated 150-ton lifting equipment. However, frequent handling of medium-sized yachts exposed two structural limitations. First, its span and lifting-point configuration could not accommodate different hull profiles. These included 15-to-18-meter planing boats and catamarans. Second, its corrosion protection was insufficient for year-round outdoor operation. The Adriatic Sea’s high-salinity environment made this limitation more serious. The client requested a 45t travel lift to fill the capacity gap in medium-sized yacht handling. It also required three performance indicators to match existing large equipment: structural corrosion protection, synchronization accuracy, and hull contact protection.

hscrane-45t-travel-lift-1

Core Parameters and Technical Configuration of the 45t Travel Lift

HSCRANE customized a 45t travel lift for the marina using its proven marine lifting platform. The main technical specifications are listed below:

Parameter

Technical Specification

Rated Lifting Capacity 45 t
Adjustable Clear Span 7–18 m (adjustable)
Maximum Lifting Height 5–25 m
Hoisting Speed 0–3 m/min (stepless speed control)
Traveling Speed 0–40 m/min
Full-Load Gradeability 4%
Drive System Hydraulic drive with diesel power unit
Steering Modes Front-wheel steering, crab steering, spot rotation, and synchronized steering
Sling Configuration Multi-layer flexible synthetic fiber slings with synchronized multi-point load support
Protection Rating IP55 (electrical control system)
Corrosion Protection Sa2.5 sandblasting + high-weatherability marine coating system

The adjustable span allows one machine to accommodate various vessel types. These include monohull planing boats, catamarans, and small patrol boats. Its hydraulic synchronized lifting system uses multi-point load feedback. This ensures balanced force distribution beneath the hull. Flexible slings also prevent localized compressive stress. This protects the hull’s gelcoat and structural components. Crab steering and spot rotation simplify short-distance movements between marina berths. Traditional multi-stage repositioning becomes a single positioning operation. This significantly reduces berth occupancy time during launching and retrieval.

hscrane-45t-travel-lift-2

Customized Engineering Adaptations for the 45t Travel Lift

The marina occupies an exposed coastline directly facing sea winds and salt spray. Therefore, the 45t travel lift operates under highly corrosive conditions. HSCRANE’s engineering team implemented three targeted adaptations based on its standard 45-ton platform:

●Enhanced Structural Corrosion Protection: Main structural components undergo Sa2.5 sandblasting. They then receive a three-layer marine heavy-duty coating system: primer, intermediate coat, and topcoat. Fasteners and pins use stainless steel or Dacromet treatments. Additional moisture-resistant sealing modules protect electrical cabinets and wiring terminals.

●Synchronization Control Optimization: Medium-sized yacht hulls generally have lower structural stiffness than large steel yachts. Therefore, the engineering team tightened the multi-point synchronization deviation threshold. It was set to 70% of the maximum design limit. This helps prevent localized stress concentration caused by load redistribution during lifting.

●Ground Load-Bearing Adaptation: The team evaluated the existing concrete pavement’s load-bearing capacity. Tire configuration and ground contact pressure were also checked. These measures prevent additional damage to the marina surface during fully loaded travel.

hscrane-45t-travel-lift-3

Operational Results and Performance Verification

After installation and commissioning, the equipment entered formal operation. The marina achieved measurable improvements in medium-sized yacht handling efficiency. Within typical operating windows, the handling cycle for 15-to-18-meter yachts decreased by approximately 32%. This compared with the previous indirect handling method using larger-capacity equipment. Average daily effective handling cycles increased from fewer than six to more than eight.

The flexible sling system caused no recorded hull surface damage throughout the entire trial operation period. During acceptance, the client’s operations director confirmed: “The 45t travel lift’s adjustable span and steering accuracy fully match our high-frequency operations. They also accommodate our diverse vessel types. Its corrosion protection has passed the first high-humidity season of continuous operation.”

hscrane-45t-travel-lift-4

The project increased the marina’s service throughput for medium-sized luxury yachts to 1.4 times its previous level. No expansion of large berths was required. The additional equipment capacity also provides operational flexibility. It supports the marina’s future expansion into seasonal yacht management services.


WhatsApp
Phone
Inquiry
Email
Whatsapp
Top